|
|
 Question Regarding Front Hubs
#574276
02/28/05 08:59 PM
|
Joined: Jun 2001
Posts: 1,452
OP
Body Damage is Cool
|
I was looking here: http://www.superwinch.com/pages/hubs.htmland noticed Superwinch lists two different part numbers for the D-50 4x4s - 400528 & 400543. Does anyone know the difference? I know the 400543 is what the Monteros use. It's just that I don't want to buy a set (when I'm scrounging in the junkyards) that's essentially useless. Are the hubs for the '81 and older D50s much different (ie, easy to tell from the later hubs)? TIA.
Last edited by Jim_B; 02/28/05 10:10 PM.
|
|
|
Re: Question Regarding Superwinch Hubs
[Re: Jim_B]
#574277
02/28/05 09:25 PM
|
Joined: Dec 2001
Posts: 11,727
Web Wheeler
|
I'm not a expert but I thought SuperWinch were aftermarket items ???
98 Montero with cold weather package
96 Toyota Land Cruiser, fully locked Mall Machine :-)
|
|
|
Re: Question Regarding Superwinch Hubs
[Re: LRJ4x4]
#574278
02/28/05 09:33 PM
|
Joined: Jun 2001
Posts: 1,452
OP
Body Damage is Cool
|
They are. I'm not really referring *just* to the Superwinch hubs but to Superwinch, Aisin, etc.
|
|
|
Re: Question Regarding Superwinch Hubs
[Re: Jim_B]
#574279
02/28/05 09:47 PM
|
Joined: Dec 2001
Posts: 11,727
Web Wheeler
|
IC, well looks like you should be fine with any 82 or newer D-50, not sure what the difference my be. spline count or diameter ???
98 Montero with cold weather package
96 Toyota Land Cruiser, fully locked Mall Machine :-)
|
|
|
Re: Question Regarding Superwinch Hubs
[Re: LRJ4x4]
#574280
02/28/05 09:55 PM
|
Joined: Jun 2001
Posts: 1,452
OP
Body Damage is Cool
|
It lists both spline counts as being 28.
|
|
|
Re: Question Regarding Superwinch Hubs
[Re: Jim_B]
#574281
02/28/05 10:27 PM
|
Joined: Jan 2003
Posts: 1,741
Body Damage is Cool
|
|
87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...
|
|
|
Re: Question Regarding Superwinch Hubs
[Re: powerRam50]
#574282
02/28/05 10:35 PM
|
Joined: Jun 2001
Posts: 1,452
OP
Body Damage is Cool
|
That would make sense if yours is an '87 (the 400528s are listed as being for the '81 and older trucks).
|
|
|
Re: Question Regarding Superwinch Hubs
[Re: Jim_B]
#574283
02/28/05 11:10 PM
|
|
Anonymous
Unregistered
|
I believe there would only be a few measurements to be concerned with (i.e., bolt pattern, spline count, axel diameter & depth of spline). May want to measure your existing hub and/or bring it with you on your next trip to the junk yard. <img src="/forums/images/graemlins/cheers.gif" alt="" />
|
|
|
Re: Question Regarding Front Hubs
[Re: Jim_B]
#574284
03/01/05 01:15 AM
|
Joined: Apr 2001
Posts: 1,030
Body Damage is Cool
|
HMD would know for sure, but...aren't the '81-and-older D50's the Dodge-customized 4x4 trucks with a Jeep front axle or something? That part number didn't cross-reference to any other vehicle, but that's prolly why there's a difference.
|
|
|
Re: Question Regarding Front Hubs
[Re: AcidophilusRex]
#574285
03/01/05 02:02 AM
|
Joined: Jun 2001
Posts: 1,452
OP
Body Damage is Cool
|
HMD would know for sure, but...aren't the '81-and-older D50's the Dodge-customized 4x4 trucks with a Jeep front axle or something? That part number didn't cross-reference to any other vehicle, but that's prolly why there's a difference. I *think* the ones w/ the Dana 30 were some kind of limited edition (and that they didn't all have the D30). Don't know for sure, though. I think you're right about HMD; he's got quite the collection <img src="/forums/images/graemlins/lol.gif" alt="" /> .
|
|
|
|
