To Header or Y pipe? That's the question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: To Header or Y pipe? That's the question [Re: Kletzenklueffer] #574519 03/01/05 08:53 PM

Joined: Feb 2004

Posts: 290

Duncannon, Pa

Kaptain

Mudrunner

Since you have to take it off anyway I would think about welding it first. Mine Cracked when I had my exhaust put on a few months ago.. I Took the pipe off, welded it, and it's been fine since.

93' Toy xCab
bobbed > 22rEB > w56 > stock duals > SAS > 4.88's > 37's

Entire Thread
Subject	Posted By	Posted
To Header or Y pipe? That's the question	Kletzenklueffer	03/01/05 03:39 AM
Re: To Header or Y pipe? That's the question	Kletzenklueffer	03/01/05 04:11 AM
Re: To Header or Y pipe? That's the question	Esquire812	03/01/05 10:20 AM
Re: To Header or Y pipe? That's the question	Kletzenklueffer	03/01/05 08:43 PM
Re: To Header or Y pipe? That's the question	Kaptain	03/01/05 08:53 PM
Re: To Header or Y pipe? That's the question	razerror	03/01/05 09:19 PM
Re: To Header or Y pipe? That's the question	Anonymous	03/02/05 08:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.508s Queries: 16 (3.506s) Memory: 0.6053 MB (Peak: 0.6383 MB) Data Comp: Off Server Time: 2026-06-17 10:15:15 UTC
Valid HTML 5 and Valid CSS