To Header or Y pipe? That's the question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: To Header or Y pipe? That's the question [Re: Kaptain] #574520 03/01/05 09:19 PM

Joined: Oct 2003

Posts: 8

razerror

Need a Spot

I had the same problem, it seems to be pretty common. I think that one of the causes of this is the hangers rusting and the whole exhaust system pulling down on this welded seam. I have kept the hangers in good shape and have had no more problems after having it rewelded.

Entire Thread
Subject	Posted By	Posted
To Header or Y pipe? That's the question	Kletzenklueffer	03/01/05 03:39 AM
Re: To Header or Y pipe? That's the question	Kletzenklueffer	03/01/05 04:11 AM
Re: To Header or Y pipe? That's the question	Esquire812	03/01/05 10:20 AM
Re: To Header or Y pipe? That's the question	Kletzenklueffer	03/01/05 08:43 PM
Re: To Header or Y pipe? That's the question	Kaptain	03/01/05 08:53 PM
Re: To Header or Y pipe? That's the question	razerror	03/01/05 09:19 PM
Re: To Header or Y pipe? That's the question	Anonymous	03/02/05 08:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.534s Queries: 16 (3.531s) Memory: 0.6050 MB (Peak: 0.6380 MB) Data Comp: Off Server Time: 2026-06-16 18:30:59 UTC
Valid HTML 5 and Valid CSS