Rebuilding a 2.6, Oil Pump Questions.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rebuilding a 2.6, Oil Pump Questions. [Re: DanWheeler] #574624 03/01/05 08:40 AM

Joined: May 2000

Posts: 6,132

Portland OR

Kevin C

Trail Leader

I did not like the machining in the Mealling pump. The surface finish was very course in the one I had.

They do work, I just though the factory pump was a better part.

Kevin

Entire Thread
Subject	Posted By	Posted
Rebuilding a 2.6, Oil Pump Questions.	Racer4	03/01/05 05:54 AM
Re: Rebuilding a 2.6, Oil Pump Questions.	Kevin C	03/01/05 07:27 AM
Re: Rebuilding a 2.6, Oil Pump Questions.	DanWheeler	03/01/05 07:52 AM
Re: Rebuilding a 2.6, Oil Pump Questions.	Kevin C	03/01/05 08:40 AM
Re: Rebuilding a 2.6, Oil Pump Questions.	dadrab	03/01/05 04:48 PM
Re: Rebuilding a 2.6, Oil Pump Questions.	JohnnyBfromPeoria	03/01/05 04:55 PM
Re: Rebuilding a 2.6, Oil Pump Questions.	highmtndesert	03/01/05 05:02 PM
Re: Rebuilding a 2.6, Oil Pump Questions.	Kevin C	03/01/05 05:07 PM
Re: Rebuilding a 2.6, Oil Pump Questions.	Racer4	03/01/05 03:46 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.495s Queries: 16 (3.493s) Memory: 0.6105 MB (Peak: 0.6435 MB) Data Comp: Off Server Time: 2026-06-13 05:17:32 UTC
Valid HTML 5 and Valid CSS