Head gasket replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head gasket replacement [Re: madman] #576563 03/05/05 07:21 PM

Anonymous

Unregistered

yes, you leave all that intake junk on until the head is removed.
also, it pays to have a good place to set the head in advance. Like a block of wood for the bottom of the head, but then that should be on something higher because the IAC is hanging down on one side and the exh. manif. is on the other.

Entire Thread
Subject	Posted By	Posted
Head gasket replacement	madman	03/05/05 05:17 PM
Re: Head gasket replacement	pucci	03/05/05 07:10 PM
Re: Head gasket replacement	madman	03/05/05 07:14 PM
Re: Head gasket replacement	Anonymous	03/05/05 07:21 PM
Re: Head gasket replacement	islandracer	03/06/05 05:16 PM
Re: Head gasket replacement	mlclark	03/06/05 11:39 PM
Re: Head gasket replacement	pucci	03/07/05 02:53 AM
Re: Head gasket replacement	islandracer	03/07/05 03:46 PM
Re: Head gasket replacement	Ed Mc	03/07/05 09:10 PM
Re: Head gasket replacement	pucci	03/07/05 11:31 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 8.909s Queries: 16 (8.906s) Memory: 0.6085 MB (Peak: 0.6415 MB) Data Comp: Off Server Time: 2026-07-13 11:37:02 UTC
Valid HTML 5 and Valid CSS