300m kind? That's a bearing they use in Longfield Birfield joints... <img src="/forums/images/graemlins/confused.gif" alt="" />

Does SAW make another torsion bar size for the T other than 25.5mm? I've never heard of it...

Sounds like you simply need to crank one side back up... Do that & re-measure the rear; Probably won't be as bad off in the rear as you are now. As you'll most likely need an alignment after cranking it up, you may consider just having the alignment shop do it. Simply ask them to level it out; They should do it without any additional charge, as it should be considered a part of the alignment you're already paying for. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Fwiw, Downey also makes a good set of torsion bars... I've been running a set for a few years with good results. They're 26mm, doesn't have that annoying plastic cover that cracks like SAW, made by the same folks as OEM. <img src="/forums/images/graemlins/cheers.gif" alt="" />