I got the wiring hooked up yesterday and I now have working backup lights along with a functional 4WD indicator <img src="/forums/images/graemlins/kewl.gif" alt="" />.

I have an 85 4runner, however, the wiring is supposed to be similar on trucks and 4runners up to 1994 (according to Haynes <img src="/forums/images/graemlins/cyclops.gif" alt="" />).

I made all of the new connections underneath the intake manifold. This is where you have all of those unused wires & plugs after removing the auto tranny.

The 4WD indicator switch on the T-case just needs a single wire connection. You need to splice into a small, light green wire. It runs into a small, white, round plug that shares 2 other small wires.

The backup light switch on the tranny uses 2 wires, so you have to find 2 wires to splice into;

One of them is a small, red wire w/blue stripe. It runs into the same plug that the neutral start switch wiring runs into. It's a large, round, tan plug.

The other one is a small, solid red wire. It runs into a large, round, white plug that shares two other small wires.

I had to solder in extra wire at the manifold and routed it to the tranny. I used standard, pre-insulated, crimp-on, quick-disconnects to hook up the wiring at the tranny.

ThatÆs it.


85 Toyota 4runner with some stuff...
[color:"blue"]Trail Pics[/color]