Can I use a Holley carb on my 2.6?

Print Thread

Rate Thread

Re: Can I use a Holley carb on my 2.6? [Re: Racer4] #581354 03/17/05 08:29 PM

Joined: Dec 2004

Posts: 949

Mill Hall, PA

Monty

Rock Warrior

Stock intake modified to accept a Holly carb.

I took a rochester carb base to holly carb adapter plate, and tig welded it to the intake. The plate can be bought at any speed shop. You take the the rochester side (smaller side) and weld that to your intake.

I used a 500 cfm Holly carb jeted down to .62

[Linked Image]

Last edited by Monty; 03/17/05 08:31 PM.

1989 Raider V6/MT
2005 Jeep Liberty CRD Turbo Diesel

Entire Thread
Subject	Posted By	Posted
Can I use a Holley carb on my 2.6?	Racer4	03/17/05 05:14 AM
Re: Can I use a Holley carb on my 2.6?	MontyMcV	03/17/05 05:25 AM
Re: Can I use a Holley carb on my 2.6?	FrankR	03/17/05 05:28 AM
Re: Can I use a Holley carb on my 2.6?	Racer4	03/17/05 05:33 AM
Re: Can I use a Holley carb on my 2.6?	FrankR	03/17/05 06:05 AM
Re: Can I use a Holley carb on my 2.6?	Racer4	03/17/05 03:46 PM
Re: Can I use a Holley carb on my 2.6?	FrankR	03/17/05 04:28 PM
Re: Can I use a Holley carb on my 2.6?	Anonymous	03/18/05 02:10 PM
Re: Can I use a Holley carb on my 2.6?	FrankR	03/18/05 03:21 PM
Re: Can I use a Holley carb on my 2.6?	Jamez	03/18/05 06:17 PM
Re: Can I use a Holley carb on my 2.6?	FrankR	03/18/05 07:05 PM
Re: Can I use a Holley carb on my 2.6?	grass13	03/17/05 05:15 PM
Re: Can I use a Holley carb on my 2.6?	RockU	03/17/05 04:41 PM
Re: Can I use a Holley carb on my 2.6?	DMYERSCHATTTN	03/17/05 08:21 PM
Re: Can I use a Holley carb on my 2.6?	Monty	03/17/05 08:29 PM
Re: Can I use a Holley carb on my 2.6?	dylanb	03/17/05 11:54 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: