Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: aussie locker [Re: wranglert] #582663 03/22/05 02:13 AM
Anonymous
Unregistered
My rear axle is an 8.25 out of a cherokee as well. It was an EASY swap, slip the perches and fab some shock mounts and bolt it in. I have a lockright in my 8.25, it work well. i didn't know that aussie lockers were putting out a 27 spline locker yet, or did you upgrade to 29 spline shafts?

Re: aussie locker #582664 03/22/05 04:33 AM
Joined: Apr 2004
Posts: 145
W
wranglert Offline OP
Wheeler
that is the question that kept me from ordering today. i got stuck working almost 13 hours and i didn't have the time to tear into the axle. mechanic thinks it's 29 but not sure so that's what i get to do tomorrow (hopefully)


90 wrangler 6 cyl. 97 honda passport 84 dodge longbed 4x4
Re: aussie locker [Re: wranglert] #582665 03/22/05 06:36 AM
Anonymous
Unregistered
You say its from a 93? Unless it has been modified, it has the 27 spline shafts. You should really just pull the shaft yourself, it will take a half hour. I bet since it still has the 3.07's it still has 27 spline shafts.

Re: aussie locker #582666 03/22/05 10:17 PM
Joined: Apr 2004
Posts: 145
W
wranglert Offline OP
Wheeler
i am pulling it myself, i do a lot of it myself. i work for a big construction company and i don't always have the time to do some of the stuff i'd like to. he does stuff for me for next to nothing because i'm able to get overstock things from jobsites for him so it's no biggie to let him do some of the work


90 wrangler 6 cyl. 97 honda passport 84 dodge longbed 4x4
Page 2 of 2 1 2

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5990 MB (Peak: 0.6567 MB) Data Comp: Off Server Time: 2026-06-10 06:30:10 UTC
Valid HTML 5 and Valid CSS