it sounds good. i've seen them go from $30 to $300 for one. check ebay and see what they're going for and compare that way. i didn't have to buy mine so i don't really know. one thing i've run into is the stud holes. mine are 9/16 - 18 but most of the stud kits and arms i'm finding are 5/8 - 18. do a lot of research before you buy any steering parts. it's going to get expensive. i think the chevy tie rod ends are about $50 ea. arms average $100 ea. stud kits $70 for both sides. then you still need the links. there are lots of ways to do it, just make sure you plan it out well. the arms i've seen advertised usually say they work with the big chevy tre's or heim joints. i'm not sure if there is anything on the market that you could use your stock steering linkage with.

i'm still researching the steering. i'll let you know what i come up with.