Quote
I welded mine last month. If you gingerly bend the brake line hanger up, you don't have to worry about removing any brake lines. A Dremel and some brake cleaner and an air gun will get it cleaned just fine. No need for major disassembly. LOL

I just bent my brake hanger up about an inch and a half, cleaned the small area I needed to weld, and started welding. It shouldn't be made any harder than that.



heaven forbid we weld without a beer close by. i welded jroc's up a year ago. it is holding fine.

Scott Landon
1995 T100 - total buildup underway
1988 4Runner (22RE, W56) - new DD
2005 Dodge CTD 4x4 - Tow Beast
1990 Spec Miata
2010 GT3
2013 E92 M3