head bolt torque

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: head bolt torque [Re: swamprocket] #584918 03/25/05 01:12 AM

Joined: Sep 2003

Posts: 286

Calif.

BennyBoy

Mudrunner

If your insalling a head, Its a good idea to use ARP head studs. With the ARP's I used on my 22r, I went to 92ft-lb. With stock head bolts I run them to 60ft-lb. with a nice coating of Never-Sez.
Always seems to work out well.

<img src="/forums/images/graemlins/cheers.gif" alt="" />

Entire Thread
Subject	Posted By	Posted
head bolt torque	swamprocket	03/25/05 12:36 AM
Re: head bolt torque	BennyBoy	03/25/05 01:12 AM
Re: head bolt torque	kyle-22r	03/25/05 04:20 AM
Re: head bolt torque	BennyBoy	03/25/05 10:45 AM
Re: head bolt torque	engnbldr	03/25/05 04:51 AM
Re: head bolt torque	Toy Story	03/25/05 06:23 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.488s Queries: 16 (3.486s) Memory: 0.6028 MB (Peak: 0.6358 MB) Data Comp: Off Server Time: 2026-06-16 13:10:12 UTC
Valid HTML 5 and Valid CSS