head bolt torque

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: head bolt torque [Re: swamprocket] #584920 03/25/05 04:51 AM

Joined: Jun 2003

Posts: 3,576

1800 acre island at the Oregon...

engnbldr

Roll Me Over

[quote]I know the proper torque on 22r head bolts is 58 ftlbs, but I have also seen publications that say 62.

____________________________________________________________

>>>*The spec is 58 lbs ft, we always torque them to 58 initially, then at retorque after warmup/breakin we will use the 60# to 62# figure....*EB

*Beats the he** outa me!....*LOL**...

Entire Thread
Subject	Posted By	Posted
head bolt torque	swamprocket	03/25/05 12:36 AM
Re: head bolt torque	BennyBoy	03/25/05 01:12 AM
Re: head bolt torque	kyle-22r	03/25/05 04:20 AM
Re: head bolt torque	BennyBoy	03/25/05 10:45 AM
Re: head bolt torque	engnbldr	03/25/05 04:51 AM
Re: head bolt torque	Toy Story	03/25/05 06:23 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.523s Queries: 16 (3.520s) Memory: 0.6039 MB (Peak: 0.6368 MB) Data Comp: Off Server Time: 2026-06-16 04:33:43 UTC
Valid HTML 5 and Valid CSS