Question for Mile Marker hydraulic winch owners

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Question for Mile Marker hydraulic winch owners #585637 03/26/05 10:15 PM

Joined: Apr 2003

Posts: 319

Calgary Canada

spannky

Mudrunner

The Winches I am looking at are the Mile marker 10500 lb or 12000 lb models .
I am told by PHIL that this is the winch of choice for the Mitsu crowd .
I am also told that the Toyota and MItsubishi power steering pumps out put is less then mile markers recomended 1500 psi/ 3.5 gpm.
Do you think this is a problem ?
Does it make a 12000lb winch pull at say 10000 lbs .Any one running a up graded pump?

Entire Thread
Subject	Posted By	Posted
Question for Mile Marker hydraulic winch owners	spannky	03/26/05 10:15 PM
Re: Question for Mile Marker hydraulic winch owners	PHIL_	03/27/05 11:54 PM
Re: Question for Mile Marker hydraulic winch owners	highmtndesert	03/28/05 03:46 AM
Re: Question for Mile Marker hydraulic winch owners	off-roader	03/28/05 06:35 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.861s Queries: 15 (3.859s) Memory: 0.5992 MB (Peak: 0.6322 MB) Data Comp: Off Server Time: 2026-05-29 23:44:54 UTC
Valid HTML 5 and Valid CSS