Bought a welder today!!!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bought a welder today!!! [Re: ckimbrough18] #587491 04/01/05 12:44 AM

Anonymous

Unregistered

I've got a Handler 135 that I love. Had it for about 4 years now and no problems. I have welded up to 3/8" with it. Mine recommends up to 1/4" but I think that is underrated if you know what your doing. You have just opened up your relm of fabrication abliities. Have fun!!!

Entire Thread
Subject	Posted By	Posted
Bought a welder today!!!	ckimbrough18	03/31/05 11:22 PM
Re: Bought a welder today!!!	litnin	03/31/05 11:59 PM
Re: Bought a welder today!!!	strawmyers	04/01/05 12:00 AM
Re: Bought a welder today!!!	Anonymous	04/01/05 12:44 AM
Re: Bought a welder today!!!	NotSoSimple	04/01/05 01:06 AM
Re: Bought a welder today!!!	anubis	04/01/05 02:49 AM
Re: Bought a welder today!!!	ckimbrough18	04/01/05 03:32 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.387s Queries: 16 (3.385s) Memory: 0.6012 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-05-27 13:20:28 UTC
Valid HTML 5 and Valid CSS