Bought a welder today!!!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bought a welder today!!! [Re: NotSoSimple] #587493 04/01/05 02:49 AM

Joined: Jan 2005

Posts: 434

VA, Richmond

anubis

Mudrunner

I have one of the Miller 135's It works fine for me. Can do 1/8 inch very well. I do a lot of stainless with it as well. Works great there to. Just remember to watch your duty cycle so that your weld will be good and strong.

Entire Thread
Subject	Posted By	Posted
Bought a welder today!!!	ckimbrough18	03/31/05 11:22 PM
Re: Bought a welder today!!!	litnin	03/31/05 11:59 PM
Re: Bought a welder today!!!	strawmyers	04/01/05 12:00 AM
Re: Bought a welder today!!!	Anonymous	04/01/05 12:44 AM
Re: Bought a welder today!!!	NotSoSimple	04/01/05 01:06 AM
Re: Bought a welder today!!!	anubis	04/01/05 02:49 AM
Re: Bought a welder today!!!	ckimbrough18	04/01/05 03:32 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.441s Queries: 16 (3.439s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-05-28 20:37:46 UTC
Valid HTML 5 and Valid CSS