Mine did that same thing. I tried tightening the belt, but that didn't really change anything. Mine usually goes away once it runs for a while. Anyway, if you look behind the passenger side wheel where that rubber splash gaurd goes around the shock absorber and other steering components, you can see right through the opening and what do you see: the alternator. To be honest, it is in a really bad spot for mud and water to wreck it and destroy the bearings. I don't know that much, but if I was a betting man, I would say that that could be the reason. Mine makes a slight noise after sitting for a while, but once run a while the noise goes away. My noise is usually only when large electrical demand is put on the alternator, like the head lights. I haven't found a way to solve this problem of mud and water wrecking alternator bearings, but maybe bretwalda can help us out b/c he goes through more of that stuff with his Gen II than anyone I know <img src="/forums/images/graemlins/zombie.gif" alt="" /> <img src="/forums/images/graemlins/smile.gif" alt="" />

On the Gen I its up high so it stays clean and dry <img src="/forums/images/graemlins/smile.gif" alt="" />


97 Montero SR w/Mitsu Adj Shocks & Rear Diff Lock ARB Front Diff Lock 4.9 Ring/Pinion 3.15 transfer box 43:1 crawl ratio 2" suspen lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs 15x10 Wheels Rock Sliderz ARB front bumper w/12k winch Custom rear bumper