Help! Head Bolt Removal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Help! Head Bolt Removal [Re: steven c] #589767 04/11/05 03:10 AM

Anonymous

Unregistered

Does your 10mm socket head have a bevel on the end of it. If it does, cut the end of it off flat. When you do, you will find you can get deeper into the bolt.

Entire Thread
Subject	Posted By	Posted
Help! Head Bolt Removal	steven c	04/07/05 01:02 AM
Re: Help! Head Bolt Removal	Richard Saylor	04/07/05 01:16 AM
Re: Help! Head Bolt Removal	steven c	04/07/05 02:55 AM
Re: Help! Head Bolt Removal	Richard Saylor	04/07/05 03:01 AM
Re: Help! Head Bolt Removal	Anonymous	04/07/05 03:09 AM
Re: Help! Head Bolt Removal	islandracer	04/07/05 03:38 AM
Re: Help! Head Bolt Removal	800XL	04/08/05 06:42 AM
Re: Help! Head Bolt Removal	Madcat	04/08/05 02:17 PM
Re: Help! Head Bolt Removal	Anonymous	04/11/05 03:10 AM
Re: Help! Head Bolt Removal	NATO308	04/22/05 06:44 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.538s Queries: 16 (3.536s) Memory: 0.6095 MB (Peak: 0.6425 MB) Data Comp: Off Server Time: 2026-06-24 19:39:02 UTC
Valid HTML 5 and Valid CSS