Dog Leg Port

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Dog Leg Port #590270 04/08/05 11:23 AM

Anonymous

Unregistered

I was looking at getting headders for my cj that I put a 73 wagoneer 360 in. I cant remember if the heads had the dog leg port or not, its been several years. I know I could just take the exhaust manifolds off but I didnt want to risk breaking bolts or ruining the gasket unless I was for sure it had the dog leg ports. Secondly, wich headders are best fit into a CJ-5(under chasis exit)? Thanks for any info.
Jason

Entire Thread
Subject	Posted By	Posted
Dog Leg Port	Anonymous	04/08/05 11:23 AM
Re: Dog Leg Port	Anonymous	04/08/05 04:41 PM
Re: Dog Leg Port	valleycat	04/08/05 07:21 PM
Re: Dog Leg Port	tomriddle	04/09/05 12:15 AM
Re: Dog Leg Port	NVR FNSH	04/14/05 08:55 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.673s Queries: 15 (3.473s) Memory: 0.5980 MB (Peak: 0.6310 MB) Data Comp: Off Server Time: 2026-06-20 04:38:35 UTC
Valid HTML 5 and Valid CSS