Dog Leg Port

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Dog Leg Port #590271 04/08/05 04:41 PM

Anonymous

Unregistered

A '73 360 will have the dog leg ports.

Personally I wouldn't swap to headers. Because of the dog leg design your existing manifolds will flow as well as most headers. You'll be eliminating the problems associated with headers like leaks, excess heat, and short life.

Entire Thread
Subject	Posted By	Posted
Dog Leg Port	Anonymous	04/08/05 11:23 AM
Re: Dog Leg Port	Anonymous	04/08/05 04:41 PM
Re: Dog Leg Port	valleycat	04/08/05 07:21 PM
Re: Dog Leg Port	tomriddle	04/09/05 12:15 AM
Re: Dog Leg Port	NVR FNSH	04/14/05 08:55 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.589s Queries: 15 (3.587s) Memory: 0.5974 MB (Peak: 0.6304 MB) Data Comp: Off Server Time: 2026-06-14 06:45:03 UTC
Valid HTML 5 and Valid CSS