Control Arm bushings

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Control Arm bushings [Re: bigdirtdog] #590412 04/09/05 01:45 AM

Joined: Oct 2004

Posts: 1,270

Long Island, NY

willzrunna96 Offline

Body Damage is Cool

i did them over when i did my liftreall easy to do but u may need an alignment after. best bet is the mark the ecentric cam bolts so you can get it close. i used a ball joint press to press the old bushings out. energy suspension makes them in polyurethane but u have to reuse the metal parts

91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders

Entire Thread
Subject	Posted By	Posted
Control Arm bushings	bigdirtdog	04/08/05 08:46 PM
Re: Control Arm bushings	willzrunna96	04/09/05 01:45 AM
Re: Control Arm bushings	mt_goat	04/09/05 02:48 AM
Re: Control Arm bushings	kewlynx	04/09/05 02:49 AM
Re: Control Arm bushings	solarcrew	04/09/05 04:16 AM
Re: Control Arm bushings	mt_goat	04/10/05 09:22 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 16 (3.492s) Memory: 0.6015 MB (Peak: 0.6345 MB) Data Comp: Off Server Time: 2026-06-05 10:01:00 UTC
Valid HTML 5 and Valid CSS