How about on an Amigo <img src="/forums/images/graemlins/wink.gif" alt="" /> I removed the radiator and drilled new mounting holes in it 1.25" higher than the original holes (my BL is 1.25"... obviously you'll want to measure down 1" for yours). There was no metal to move the upper hole higher on the passenger's side of the radiator, so it only has one bolt holding that side in place. But, between the two bolts on the driver's side and the one on the passenger's side, its not going anywhere. Had to do some minor trimming on the fan shroud as well, but nothing major.