|
|
|
|
 Re: 1" body lift installed on 2nd gen trooper!
[Re: Wareagle]
#590739
03/02/06 04:05 PM
|
Joined: Nov 2004
Posts: 307
Mudrunner
|
In the front six mounts, I bought 7/16 x 6" grade 5 bolts from Tractor supply for the $4. These are a little beefier than stock, but fit perfect. Do you know if 1/2 x 6" bolts will fit in the front six mounts? These are also grade 5 bolts. Thanks
Jaime
|
|
 Re: 1" body lift installed on 2nd gen trooper!
[Re: 2000Trooper]
#590740
03/02/06 06:09 PM
|
|
Anonymous
Unregistered
|
would it be wise to buy larger bolts and maybe drill out larger holes to allow for strength? just a thought--i was pondering. i like the idea of a 1" body lift. especially if you don't have to do any other work. (trans linkage, steering linkages, hoses, etc.) <img src="/forums/images/graemlins/baby.gif" alt="" /> then i can go get a susp lift!!! <img src="/forums/images/graemlins/notooth.gif" alt="" />
|
|
|
Re: 1" body lift installed on 2nd gen trooper!
#590741
03/03/06 05:04 PM
|
Joined: Jan 2006
Posts: 26
Getting the Wheeling Fever
|
So what was the finally count of pucks needed for the BL, and does anyone know what the stock size mounts that are used on the 2nd gen trooper are?
|
|
|
Re: 1" body lift installed on 2nd gen trooper!
[Re: BajaZu]
#590742
03/03/06 06:01 PM
|
Joined: Nov 2004
Posts: 307
Mudrunner
|
Here is the number of pucks from Wareagle's Post:
First, you'll need:
*12(twelve) "pucks" or "mounts"
*6(six) Grade 5 nuts and bolts (options below)
To save some $$, I used 4 large and 8 mini (pucks)
Here is a picture to help you plan your lift: ![[Linked Image]](http://www.2trooper.com/images/body.jpg)
Jaime
|
|
|
Re: 1" body lift installed on 2nd gen trooper!
[Re: BajaZu]
#590743
03/04/06 12:14 AM
|
Joined: Nov 2005
Posts: 41
Getting the Wheeling Fever
|
Ok, I'm a little confused here. You said you need 12 pucks and one post says 16. The picture posted only seems to show 10. What am I missing here? I have a 94 Trooper and would like to do a 1" BL on. Where is the cheapest place to buy the 1" pucks and exactly how many would I need of each size?
Thanks,
Kevin
'94 Trooper S 3.2SOHC, 5spd, Aisin hubs, OME919 w/ 2" coil spacers, Edelbrock shocks, fliped BJ's and spacers, 15" snowflakes w/33x12.50x15
|
|
|
Re: 1" body lift installed on 2nd gen trooper!
[Re: ybnormal70]
#590744
03/04/06 01:02 AM
|
Joined: Aug 2000
Posts: 2,074
OP
Body Damage is Cool
|
Follow my directions at the top. They list what you need. You cna get the individual pucks from most offroad shops. They are called "replacements".
Mark-95Trooper,fr LockRight,rr LSD,5spd,TeraLow,Indy tierods&QD sways,CO2, RS9000Xs,OME912&2.5"spacers,1"BL,ARB w/Warn M8000,OBT rear bumper&sliders. Pics indy4x
|
|
|
Re: 1" body lift installed on 2nd gen trooper!
[Re: ybnormal70]
#590745
03/04/06 01:04 AM
|
Joined: Nov 2004
Posts: 307
Mudrunner
|
If you look at the image, 5 and 6 are very close together. So you have 6 on each side. Thats gives you a total of 12.
Jaime
|
|
|
|
|
|
