Tightening power steering pressure hose?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Tightening power steering pressure hose? #591650 04/12/05 02:44 AM

Joined: Jan 2004

Posts: 70

theduker

Getting the Wheeling Fever

I have an '88 2.6 Trooper. Does anybody have any idea how tight I should tighten the bolt on my power steering pump for the pressure hose. It is the bolt that the hose fits over and there are two copper washers. I can't find any torque specifications for it.

thanks.

Entire Thread
Subject	Posted By	Posted
Tightening power steering pressure hose?	theduker	04/12/05 02:44 AM
Re: Tightening power steering pressure hose?	theduker	04/13/05 04:15 AM
Re: Tightening power steering pressure hose?	RobG	04/13/05 01:13 PM
Re: Tightening power steering pressure hose?	theduker	04/15/05 12:45 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.422s Queries: 15 (3.420s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-05-30 02:00:48 UTC
Valid HTML 5 and Valid CSS