$68.95 for shipping <img src="/forums/images/graemlins/zombie.gif" alt="" /> Your getting robbed. The guy shipped mine UPS for like 10bucks. Good luck at the salvage. Those are getting hard to find in salvage yards around here. Most of the salvage Troopers are hit in front.

As for the wiring, it is easy you just have to take your time. The only harness you need is for the headlights and you can get those at any parts store in the replace-a-part section. You just have to be sure and get the high beams and low beams right. If you have any mechanical ability and a voltage light you can do it. As for the signals your current running lights are in your headlamp assembly, and now they will be in your signal assembly. Then all you have is a little side marker light and a turn indicator. In all you will have three lights in the new housings, two of which tie into the two wires you pull from the light next to the headlight in your current ones and the other is your signal. If you want me to I can try and take some pics tomorrw night. I would recommend that you solder and heat shrink all of your connections because the front of your Troop takes on a lot of water and crimp-ons will eventually fail.
Oh, something extra I did was instead of using the plastic clips, I welded little 8/32" nuts in the clip holes and used screws to hold the grill in place. It is much stronger that way.