Head replacement (timing question)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head replacement (timing question) #595051 04/21/05 03:54 PM

Joined: Dec 2004

Posts: 287

Houston, Texas in 2007

islandracer Offline

Mudrunner

Quote

i should line the mark on the crankshaft with the mark on the lower timing cover and the camshaft with the appropriate mark on the upper timing cover. The distributor should then be installed with the rotor pointing at the #4 cylinder and it should be correct?

You got it! <img src="/forums/images/graemlins/kewl.gif" alt="" />

B.Y.E. ~ Back Yard Engineering

Entire Thread
Subject	Posted By	Posted
Head replacement (timing question)	steven c	04/21/05 01:11 PM
Re: Head replacement (timing question)	Anonymous	04/21/05 03:08 PM
Re: Head replacement (timing question)	islandracer	04/21/05 03:54 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.839s Queries: 15 (3.837s) Memory: 0.5970 MB (Peak: 0.6300 MB) Data Comp: Off Server Time: 2026-06-25 11:10:03 UTC
Valid HTML 5 and Valid CSS