EGR Hex Bolt?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: EGR Hex Bolt? [Re: mr_spicoli] #595362 04/22/05 06:09 AM

Joined: Aug 2000

Posts: 474

South Saint Paul, MN

muskyamigo Offline

Mudrunner

The bolt on the under side of the EGR holding the tube to the valve is a 22mm bolt with a normal thread. just remember you're looking at it from the back of the bolt.

BTW its good to see other Minnesotans on here!

Mike W

Mike Walter
'98 Amigo well used
'94 Rodeo in need of help
'99 Ram CTD for hauling feather pillows
'01 unheated shop

Entire Thread
Subject	Posted By	Posted
EGR Hex Bolt?	mr_spicoli	04/22/05 05:41 AM
Re: EGR Hex Bolt?	muskyamigo	04/22/05 06:09 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.787s Queries: 16 (3.785s) Memory: 0.5943 MB (Peak: 0.6272 MB) Data Comp: Off Server Time: 2026-06-01 23:54:14 UTC
Valid HTML 5 and Valid CSS