All right.... I was trying to do something about the door jam gap not being right after a horrid accident several years ago on my 91 YJ that involved a jack, a bunch of wooden blocks and a creative moment.... The jack slipped out and went flying into the steering colum. It took the signal arm with it. I'm stuck on high beams, the wipers won't work except for the mode that you turn on the washer and it runs a couple times and quits. I have turn signal use, but it takes some work.....

I need to know what all is going to be involved in replacing the switch inside.

The latest catelog from 4Wd.com doesn't seem to have it listed and I hate their web site. Ya never can just find one thing without looking at zillions of other things first.

I am quite sure that I need to replace the switch, the ring thing with another switch in it and the arm. The only thing that isn't ruined is the sleeve that has the washer options on it. That comes with the arm and I think it runs about $55 or so for just this.....

What a headache....

Any experience with pulling Jeep YJ steering colums and these switches?

Will be honored to post pictures of this mess if anyone needs them....