Rear driveshaft center bearing is shot

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Rear driveshaft center bearing is shot #597068 04/26/05 10:51 PM

Joined: Feb 2004

Posts: 290

Duncannon, Pa

Kaptain

Mudrunner

So should I replace it or just go with a 1 piece shaft? Should I go with an OEM bearing or is there something better out there? I remember somebody posting something about bending 3 of his 1 piece shafts and he went back to the 2 piece anyway.

93' Toy xCab
bobbed > 22rEB > w56 > stock duals > SAS > 4.88's > 37's

Entire Thread
Subject	Posted By	Posted
Rear driveshaft center bearing is shot	Kaptain	04/26/05 10:51 PM
Re: Rear driveshaft center bearing is shot	BrokeAsAJoke	04/27/05 12:49 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.586s Queries: 15 (3.584s) Memory: 0.5940 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-06-17 15:19:41 UTC
Valid HTML 5 and Valid CSS