I am currently dropping my rebuild 22RE into my 4-Runner (with an A340H tranny). However, I do not remember how the driveplate bolts onto the crankshaft. There is the driveplate, spacer, and spacer washer. What order do these bolt to the crank and does the "dish" of the driveplate face in or out. Any help on the matter would be greatly appreciated. I want to make sure that the 6 bolts in the torque converter go in and there are no clearance issues.

Last edited by Wildcat_4R; 04/27/05 08:23 PM.
1987 4-Runner with a "slightly modified" 22RE