If you are talking about the front input seal yes it's easy enough to change. Just pull the tranny and take the clutch fork off. Then the front cover needs to come off of the inside of the bellhousing. There should be about 5 or 6 12mm bolts holding the cover on. Now on the inside of the front cover is the seal that needs replaced. My seal looked pretty good, it was the front cover that needed re-blue-glued. It seems as if the cover itself was actually what was leaking.

Joe

A gun in the hand is better than a cop on the phone.

98 Passport 33's, Supercharged, Calmini Bumper, rockbars, diff drops, Teralows, 4.77's, Aussie and ARB lockers, Safari snorkel, Optima red top.