yeah. its easy to get to. If that is where its leaking, then maybe we can both do them at the same time. I have to do the same thing. I had the front output out when I did my 3.07's. It realy is pretty easy. I had to heat up one of my front drive shaft bolts to get it loose. Thats when I think I fried it. You just unbolt the drive shaft, take out the nut, take off the flange, take out the bad seal. Then replace the seal, and repeat steps in reverse. And here's a <img src="/forums/images/graemlins/kewl.gif" alt="" /> for the <img src="/forums/images/graemlins/baby.gif" alt="" />.