Changed out the temp sending unit for the ECM and no change. It was a PITA to get to also. Anyway, I also removed the big hose at the Throttle Body and used my thumb to let more or less air in through the Auxilary Air Valve while plugging the nipple that the hose would normally go on. When I let it pull full air, it would behave just as before (start, go to high idle, then die). When I cut the air down it had trouble starting at all.
I was talking with my dad and he thinks maybe I am describing the problem with too much detail. <img src="/forums/images/graemlins/confused.gif" alt="" /> I am now going to describe the symptom as brief and to the point as possible and maybe this will trigger an idea from someone. <img src="/forums/images/graemlins/smile.gif" alt="" />
When cold, I start the engine. It starts perfect and goes to high idle at around 1500 RPM. Five to seven second into this it dies. It does not chug or stumble before dieing. It dies flat out just like you turned the ignition off or cut the fuel supply off.
I will now bite my tongue <img src="/forums/images/graemlins/ignore.gif" alt="" /> and not add anything else. If you want to see how I keep it running until warmed up or what it drives like during warm up you can click the link at the beginning of this thread. Thanks for the continuing input!
You wouldn?t worry what people thought about you if you realized how little they did! 1988 Isuzu Trooper Limited, Bone Stock, 2.6L, 5 speed manual trany. 2001 Isuzu Trooper Limited, Bone Stock, 3.5L, Automatic.
|