UPDATE: Got the wiring harness put back together. Checked all of the wires....they are good to go. However, when I try to jump my fuel pump from the diagnostic ports, it no longer makes a sound. Could it be that a relay or fuse that has been blown?
I now know the wires to my injectors are good. The ground cable that is on the intake plenum/intake is good. The grounds to the E01 and E02 connectors are good. The power coming from the solenoid resistor is good. What am I missing to get this thing working? ARRRGGGHH!!!

Darin- it was a little messy under the tape but not too bad. Fixing the spliecs was pretty easy and I got the harness looking all pretty again.

1987 4-Runner with a "slightly modified" 22RE