After everything....it turned out to be that 3 of the 4 injectors were not firing (Cruzin Performance will be getting a call from me tomorrow). I replaced the injectors with a set I got from LC engineering and the motor fired up almost instantly. Timing is perfect at 5 deg. BTDC and the idle sits at 700rpm. Getting a little noise from the rockers so I'll have to tighten them up a tad...think I might have set them a little too loose. It runs amazingly smooth, and I couldn't be happier (unless of course someone would like to donate a SAS kit to me <img src="/forums/images/graemlins/kewl.gif" alt="" />). I just want to thank you all for helping me to set this up and get it up and running. Couldn't have done it without this board. I'll keep ya'll updated on how it drives as it breaks in.