|
|
|
|
supra LSD in front axle?
#600717
05/06/05 10:25 PM
|
Joined: May 2003
Posts: 126
OP
Wheeler
|
I just removed my ARB from the front axle. Had to cause I swapped it for a 2JZ engine and I seldom use the ARB. I wanted to retrofit the OEM open carrier (Landcruiser 70-80 series high pinion) but discoverd that I have 3 allmost identical carriers in my shed. I recall stripping 2 supra's, an '86 7M-GE auto (with optional LSD package) and a '92 7M-GTE manual. Plus I have the LC open carrier from the high pinion. I can identify one set as from a supra cause it had the 3.7 gears. This is also the LSD which is 5mm smaller than the other 2 LSD's. Dunno if its from the turbo or not. So I'm left with 2 identical carriers with identical dimensions and bearings. They are so identical that I cannot see which one is the LSD and which one is the open model. I have to open one up or use 2 shafts to find out which is the lSD. Since they are the same I have a choise. LSD or not?
Now back to my question: is it worth to have an LSD up front? Anybody use a supra LSD up front before?
Black '90 4R
SAS with LC80 coils and LC70 high pinion axle LC80 rear axle, coils and locker 4.88 gears 2JZ-GE+turbo+intercooler
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 5.471s Queries: 15 (5.468s) Memory: 0.6018 MB (Peak: 0.6348 MB) Data Comp: Off Server Time: 2026-11-16 08:53:15 UTCValid HTML 5 and Valid CSS