GEAR RATIO 4.77

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: GEAR RATIO 4.77 [Re: JLEMOND] #602131 05/11/05 02:10 AM

Joined: Oct 2003

Posts: 97

tinytrooper Offline

Getting the Wheeling Fever

There is no 6n7 code on the plate. Just the 9JV. I was only making a ref. to the ring gear out of a p/u that I had. So due to the 9JV code this truck should have 4.77 correct?

Entire Thread
Subject	Posted By	Posted
GEAR RATIO 4.77	tinytrooper	05/11/05 12:41 AM
Re: GEAR RATIO 4.77	JLEMOND	05/11/05 01:47 AM
Re: GEAR RATIO 4.77	tinytrooper	05/11/05 02:10 AM
Re: GEAR RATIO 4.77	Anonymous	05/11/05 05:27 AM
Re: GEAR RATIO 4.77	ShowMeDave	05/12/05 02:48 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.454s Queries: 16 (3.452s) Memory: 0.6004 MB (Peak: 0.6333 MB) Data Comp: Off Server Time: 2026-05-31 15:03:31 UTC
Valid HTML 5 and Valid CSS