driving light installation

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: driving light installation [Re: Davis5210] #602477 05/12/05 04:43 AM

Joined: May 2003

Posts: 72

Wells, ME

Pedro

Getting the Wheeling Fever

I found that drilling a small hole through the firewall just below the factory hole works the best. I would definitely suggest getting a small rubber gromet that will protect the wires through the hole.

Kindly

Pedro
95' 4runner 4x4 beige
31" Firestone MT's
ARB winch bumper
custom rear bumper
extended rear breather
Bunch O' Crap in the back seat (highlift axe ect.)
Aluminum safari rack (rip)

Entire Thread
Subject	Posted By	Posted
driving light installation	Davis5210	05/12/05 12:58 AM
Re: driving light installation	Pedro	05/12/05 04:43 AM
Re: driving light installation	stock87	05/12/05 06:10 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.540s Queries: 16 (3.539s) Memory: 0.5963 MB (Peak: 0.6292 MB) Data Comp: Off Server Time: 2026-06-20 05:47:26 UTC
Valid HTML 5 and Valid CSS