need exhaust options for 3.4L swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: need exhaust options for 3.4L swap [Re: mt_goat] #603172 05/16/05 03:46 AM

Joined: Dec 2000

Posts: 919

Fairfax, VA

RBA

Rock Warrior

I appreciate the input but I already have that bookmarked.

What do you think if I use the Downey crossover pipe and their Y-pipe kit? I am planning to have a muffler shop do the exhaust work so that it will be clean.

BTW, where did you purchase your flexjoints?

Thanks.

Chard
94 Runner V6 4X4 (gathering parts for 5spd swap and 3.4L engine swap)

Entire Thread
Subject	Posted By	Posted
need exhaust options for 3.4L swap	RBA	05/14/05 04:21 AM
Re: need exhaust options for 3.4L swap	mt_goat	05/14/05 03:40 PM
Re: need exhaust options for 3.4L swap	RBA	05/16/05 03:46 AM
Re: need exhaust options for 3.4L swap	mt_goat	05/16/05 07:56 PM
Re: need exhaust options for 3.4L swap	RBA	05/17/05 08:37 PM
Re: need exhaust options for 3.4L swap	pr0ject42	05/18/05 04:49 AM
Re: need exhaust options for 3.4L swap	RBA	05/26/05 05:14 AM
Re: need exhaust options for 3.4L swap	mt_goat	05/18/05 12:54 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.450s Queries: 16 (3.447s) Memory: 0.6065 MB (Peak: 0.6395 MB) Data Comp: Off Server Time: 2026-06-04 03:29:15 UTC
Valid HTML 5 and Valid CSS