I will post some pics monday night, I'm working today and wont be home till then. I was able to loosen up the shackle reversal bracketry and move the mounts about a 1/4 out on each side...did a little more grinding on the axle and now I am only off by a 1/16 of an inch. This is minimal and will be bolt up just fine. I will be ready to weld them up probably monday or tuesday night. I need to do a little research on what rod to use on the cast housing.

1982/1992 CYJ "FrankenJeep" SOA with Waggy Springs 1" body, 4.0 head, borla headers & cat back, mopar MPI, Jacobs ignition, York air, Custom 3" intake w/k&n, K5 heater, Flexlight fan, 33" Coopers, DANA 44's, lockright up front, NP 435...In progress.