'93 idler arm R&R

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

'93 idler arm R&R #605676 05/22/05 04:17 PM

Joined: Jan 2000

Posts: 1,818

San Antonio, TX

Charlie Belew Offline

Body Damage is Cool

Bought auto_mon_Punkmaster's idler arm from his wrecked '94. It has a lube point built into the body. When I install the arm, anything I need to watch out for? Like making sure the arm is put on exactly like the old one to line up suspension components, etc. What about other components I should replace at the same time? Alignment needed after replacement?

None

Entire Thread
Subject	Posted By	Posted
'93 idler arm R&R	Charlie Belew	05/22/05 04:17 PM
Re: '93 idler arm R&R	wyleone	05/22/05 04:30 PM
Re: '93 idler arm R&R	Charlie Belew	05/22/05 05:09 PM
Re: '93 idler arm R&R	DougH	05/23/05 01:10 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.293s Queries: 15 (3.521s) Memory: 0.5995 MB (Peak: 0.6325 MB) Data Comp: Off Server Time: 2026-06-21 12:52:06 UTC
Valid HTML 5 and Valid CSS