Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Timing question... #606169 05/23/05 06:05 PM
Joined: Apr 2003
Posts: 152
David_M Offline OP
Wheeler
What do you guys run your 3.0's at for timing? I think the book says 5 BTDC... What do all you run? and do you set that with the Daignostics terminal shorted?

Re: Timing question... [Re: David_M] #606170 05/27/05 06:50 PM
Joined: Apr 2003
Posts: 152
David_M Offline OP
Wheeler
Ok I finaly got the right timing spec. 10 D's BTDC. I replaced my plugs, wires cap and roter. It runs smooth as glass now. However I just dont seem to have the power I should have.. Somone posted a while back saying a slight adjustment to the timing would boost the offline power a bit.. Anyone have any recomendations?


Moderated by  4x4Wire, Adam F, Dandeman, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.387s Queries: 15 (0.003s) Memory: 0.5873 MB (Peak: 0.6350 MB) Data Comp: Off Server Time: 2026-05-29 20:03:25 UTC
Valid HTML 5 and Valid CSS