Yeah, it took me 2.5 hours to get the old axle torn down, to get the nuckles, and off the car. Then it took 2 hours to get the new axle on there, and ready, minus hubs, brakes, and steering.

It actually has been a fun project, the only hard part is moving the heavy stuff around (ive been doing it alone <img src="/forums/images/graemlins/evil.gif" alt="" />)

Now I'm just marking the perches to have them welded on sometime in the next few days. The extra long u-bolt's are there temporarily while I run lift blocks. Eventually I will get either custom springs, or find some longer ones in the junkyard.

[Linked Image]
[Linked Image] <img src="/forums/images/graemlins/kewl.gif" alt="" />


'93 Rodeo - Dana 60 FF Rear - Dana 44 Front - 35's