writen by Lester

" I am able to arrange for the 5" Sun kit for the Strada/ Storm to be shipped from Thailand to USA by sea freight. You will need to do your own clearance at the US port. Cost of the kit is at approximately USD$1080 with the exchange rate of USD$1 ~ Baht$39.85. Paypal surcharge of USD$46.38, unless you have a better payment method. Shipping to Long Beach Port, USA is aproximately USD$280 and it takes about 21 - 28 working days. It is suitable for Gen 1 Montero with rear leaf springs. You can use back your original shocks with the kit or use aftermarket ones of your choice. Bulk order are welcome. See if you guys can combine shipping and perhaps can save on it. The kit comes in one box of 70kg weight, 20 component parts and measures 15" x 31" x 9". Please note the torsion bars doesn't hang low. They are tucked smartly above the crossmember. Similar kits are available for Toyo, Isuzu, Ford, Jeep, etc. Please email lesteryeong@hotmail.com for enquiries. I will get back to you soonest. Please refer to the link below for pictures. "

Strada/ Montero Lift Kit Pictures



--------------------
Lester's Monstero Gallery

This will be the build and purchase thread for this kit. I will be updating with pics and anything else I can when I install this lift. Stay posted.

Thanks for going through the trouble in getting the kit over here man i'll be buying one for my gen 1.5 <img src="/forums/images/graemlins/drunk.gif" alt="" /> later this year.

you said theres simular kits for isuzu? Are you just talking
about the design, or will there be kits avalible for isuzu, like the montero?? If so there might be intrest over on the isuzu board. I've seen some kit for isuzu over there. <img src="/forums/images/graemlins/cheers.gif" alt="" />

I'm pretty sure your talking about this lift kit, here's a link to pictures of the isuzu lift, if its the same people,(SUN somthing??)
web page

I'll post a link over on the isuzu page if you don't mind. <img src="/forums/images/graemlins/cheers.gif" alt="" />

nothing for coil spring rears? <img src="/forums/images/graemlins/frown.gif" alt="" />

stockraider or anyone else you could have valley springs make up a set of coils to match then have the panhard bar bracket droped to adjust for the lift this bracket i can have made if you can't find anyone local to you.

Hello Onebadtrooper

Yes, there are kits fot Isuzu. What do you need? Trooper Gen 1? LWB ot SWB?

Hi, I don't need anything right now. But I an interesed in the price for a gen 1 lwb, thanks <img src="/forums/images/graemlins/kewl.gif" alt="" />

Do you have any pictures of a gen 1 trooper with that lift on it??