Take Pictures <img src="/forums/images/graemlins/kewl.gif" alt="" />

Be sure to post em' up, too!!!

Clay

Hello friends
Et the first I would like to say hello to owners of Mitsubishi .Second Im sorry for my English is not so good and special technical
IÆm reading this post and IÆm trying find out some think àand until now I do not know that this suspension can assembling to Pajero with rear coil spring or not à During my visit et the Thai web side I found only pictures not cars applications

Ok.. a little update.

Well the front end is droped. The rear and front third members go to the gear shop for the front arb and R&P tommorrow. Sorry no pics yet. I'm was not able to stop by today and the shop guys where a alittle busy and forgot to take pics. But from what I understand is that there was alot of cussing and banging going on today. <img src="/forums/images/graemlins/zombie.gif" alt="" />I guess they are seeing what years of trails will do to the undercarriage. <img src="/forums/images/graemlins/shiner.gif" alt="" /> " looks like somebody went underneath with a sledge hammer and hit every piece of metal there was" 4x4ing is new to them.. Their expertise is in Baja/ desert racing.
Getting off the old banged up parts and getting the new ones to fit sounded like fun. On the lighter side.. there are some yellow parts on the front end. <img src="/forums/images/graemlins/smile.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />
I'll try to get them to take pics tommorrow.

Also, they took a closer look at the gas tank and it has a really bad crease in it were it can bust open.. On that note, I just ordered a used one from M&S and should be here by next week. I guees that's why I was short 3 gallons from stock.. <img src="/forums/images/graemlins/rolleyes.gif" alt="" /> Will the money pit ever end?? <img src="/forums/images/graemlins/frown.gif" alt="" />


*bartek. THe fron end will fit but you will have to get springs and extend the trailing arms for the rear. At least the most intricit parts fit.

Costly news but good in a way.
With the front drive system at the gear shop for the arb/gear install, they found some problems. I guess the bearing seals are bad and with all the water fording i'v done, it seized one of the bearings. So I have change the bearings and seals along with the install.. $$ <img src="/forums/images/graemlins/scared.gif" alt="" />

Well at least I didn't find out on the trail. But just unexpected expenses.

As for the lift install, It's been going pretty good. They had to do a little modding on some parts. They start on the rear tomorrow and should get the front back from the gear shop.

I'll keep you guys updated..

sorry again no pics yet..

You are killing us man! we want pictures! <img src="/forums/images/graemlins/cheers.gif" alt="" />

I second that...

I third that ... <img src="/forums/images/graemlins/shame.gif" alt="" /> <img src="/forums/images/graemlins/smile.gif" alt="" />

Just sneak in there and take a few shots. The end results should be impressive <img src="/forums/images/graemlins/kewl.gif" alt="" />

Angelo

Damm guys... keep your panties on.. It
s not the point that I can't get in there and take pics.. I haven't had a day off to take pics.

Another question for you guys.. I am changing the gas tank. What consist of this swap. Can I do this my self with help or should I have the shop guys do it. Ie.. more $

It should be an easy thing for you to do, just drop it down and swap the old stuff out of the old tank into the new one?

I have actually not done it on the monty though, but many other cars, it's not hard. Hope fully some other guys might have monty specific tips for you.