ron, i don't remember exactly what set-up you have, but if you also have the rear spacers, you shouldn't need airbags. and, the Eibach clone kit would fit just fine to give you 4" all around.

nuke, have you tried searching for a kit that would fit the MPV? if the coil height is the same or similar, compressed, on the Sportage as it is on the MPV, it should work relatively well, as long as there is a good way to mount them solidly.

95 Sportage w/welded and 5.89 geared dana 44's on 38.5" TSL's.- SADLY SOLD
CURRENTLY - 2000 sportage, 5.38 gears, welded diffs, 35" tires, 5.5" lift

http://www.cardomain.com/ride/341410