Welding Spring Perches to a Dana 44

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Welding Spring Perches to a Dana 44 [Re: winstonwrenchhead] #608022 05/28/05 05:26 AM

Anonymous

Unregistered

I welded mine up with some standered 6040.. or was it 7040? not sure, it welded just fine.

Entire Thread
Subject	Posted By	Posted
Welding Spring Perches to a Dana 44	winstonwrenchhead	05/28/05 05:11 AM
Re: Welding Spring Perches to a Dana 44	Anonymous	05/28/05 05:26 AM
Re: Welding Spring Perches to a Dana 44	BigJim	05/28/05 03:41 PM
Re: Welding Spring Perches to a Dana 44	winstonwrenchhead	05/28/05 10:43 PM
Re: Welding Spring Perches to a Dana 44	BigJim	05/29/05 01:58 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.499s Queries: 16 (3.497s) Memory: 0.5977 MB (Peak: 0.6307 MB) Data Comp: Off Server Time: 2026-06-13 20:28:49 UTC
Valid HTML 5 and Valid CSS