Welding Spring Perches to a Dana 44

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Welding Spring Perches to a Dana 44 #608023 05/28/05 03:41 PM

Joined: Oct 2003

Posts: 7,768

Central Texas

BigJim

Web Wheeler

Isn't 6040 a front seat? 6011 and 7014 would prolly work for you.. Just make sure they are zackly where you want them before putting the rod to em..
I do not see a lot of risk in the welds breaking at this weld so I would not try to overdo them.
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />

professional bovine relocation specialist

Entire Thread
Subject	Posted By	Posted
Welding Spring Perches to a Dana 44	winstonwrenchhead	05/28/05 05:11 AM
Re: Welding Spring Perches to a Dana 44	Anonymous	05/28/05 05:26 AM
Re: Welding Spring Perches to a Dana 44	BigJim	05/28/05 03:41 PM
Re: Welding Spring Perches to a Dana 44	winstonwrenchhead	05/28/05 10:43 PM
Re: Welding Spring Perches to a Dana 44	BigJim	05/29/05 01:58 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.604s Queries: 15 (3.601s) Memory: 0.5990 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-14 12:51:03 UTC
Valid HTML 5 and Valid CSS