Congradulations on your swap. Very clean indeed. This is by far the best tech write up I've seen on this swap. I did this swap last summer (04) and also am very happy with it. Wish I had this when I did mine. I used a 2" body lift, which let me use the stock Supra rad, let me raise the engine so the ac would clear the steering box and gave me more clearance around the firewall and pb booster. Also let me raise gas tank and cross member up for more ground clearance. I hacked up my core support to move the rad forward and used two 12" puller fans. Fabed upper and lower core braces and was able to use stock hood latch and ac condenser. Installed 9" pusher fan for ac. (I'm in Tx.) The only problem so far is leaky valve seals. Also I mistakingly left off the altitude compensator. I thought "HAC" was something to do with the heat and AC on the wiring schematic.