Calmini uses slip-joint connections for their exhaust, is this okay??

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Isuzu 4x4 & SUV Tech Calmini uses slip-joint connections for their exhaust, is this okay??

Print Thread

Rate Thread

Re: Calmini uses slip-joint connections for their exhaust, is this okay?? [Re: moose201] #611688 06/09/05 04:47 AM

Joined: Jan 2004

Posts: 100

South Boston, Va, USA

JohnW

Wheeler

slipjoints are very common. Torque the clamps to spec and all will be fine. Do not over torque them, this will crush the pipe and cause the leaks you are worried about.

2002 Trooper S 5spd, cone filter, Ranchos, Modified for 2WL

Entire Thread
Subject	Posted By	Posted
Calmini uses slip-joint connections for their exhaust, is this okay??	moose201	06/06/05 08:33 PM
Re: Calmini uses slip-joint connections for their exhaust, is this okay??	JohnW	06/09/05 04:47 AM
Re: Calmini uses slip-joint connections for their exhaust, is this okay??	Anonymous	06/10/05 08:55 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.948s Queries: 16 (3.647s) Memory: 0.5972 MB (Peak: 0.6302 MB) Data Comp: Off Server Time: 2026-06-22 14:55:46 UTC
Valid HTML 5 and Valid CSS